简体中文
ENGLISH
SPZ round tie rod-1
This sensor is cost-effective, compact design, flexible installation, excellent linearity up to 0.05%, and protection class IP 65. Under different conditions, it can be easily installed with clips. It is especially suitable for linear position measurement of small mechanical strokes, pressure forming machinery, textile machinery and testing fields for deformation macros, robots, take-out machines, brick machines, shoe machines, ceramic machinery, water gates, etc. The tie rods should try to use universal ball joints to overcome the lateral stress.
product properties:
1. Shell: round anodized aluminum
2. Pull rod: stainless steel (303) rotatable M5 external thread
3. Bearing: sealed flexible cushion bearing
4. Resistance element: conductive plastic
5. Sliding brush assembly: precious metal multi-tentacled sliding brush with elastic damping
6. Electronic connection: 3-core connector with shielded wire
7. Installation: 2 alumina fixed bases (standard), 4 5*15 hexagon socket screws (standard)
8. Mechanical connection: 1 M5 linear ball (standard configuration)
technical parameter:
|
Range |
10mm～300mm |
|
Linear accuracy (±%) |
±0.05%-±0.1% |
|
Resistance ±20% |
1.0 KΩ, 5.0KΩ |
|
Limited travel (B) |
Stroke + 3mm |
|
Resolution/Resolution |
Infinite analysis |
|
Repeat linear accuracy |
0.02mm |
|
Working speed |
5m/S |
|
Operating Voltage |
≤28V |
|
Recommended current |
≤1mA |
|
Operating temperature range |
—30℃ ～ ﹢100℃ |
|
Output type |
0～100﹪given input working voltage (change with the change of displacement) |
|
Sensitivity |
1 |
|
Temperature drift |
Infinitely less |
Installation dimension drawing: (see below)
